Open lid, squeeze the canister and pull lid directly up to remove entire lid from canister. Peel off seal and discard. Locate wipe at the center of the roll, twist to a point and thread though small opening in lid. Replace lid and pull wipe through. Always snap lid securely shut between uses to prevent moisture loss. To remove stains, wearing gloves rub effected area with cloth until stain is no longer visible. For heavily stained spots, rub area with greater pressure. After use, wash and sterilize instrument as per normal instrument processing. Do not use on the rings of gold or black-handled instrument (tungsten carbide or SuperCut).
Shine reNEW™ Instrument Wipes Instructions for Use
I can't believe the instrument cleaning solution, Shine reNEW™. I took all of the old hinged surgical instruments and soaked them. The instruments were clean and sterile to begin with, but I couldn't believe the quantity of debris in the bottom of the tub after the soaking. It must have been all the crud that was encrusted into the hinges. Then, I used the lubricant and worked it into the hinges.....they are all as smooth as a screen door with WD-40! You have successfully re-vitalized my instruments---thanks!