Ultrasonic Cleaning Monitor, 50 PCS
IMS-1200U
Used to monitor the effectiveness of the instrument cleaning process in ultrasonic cleaning equipment.
  • Overview
  • Resources
  • Testimonials
  • Warranty

Description

Proper cleaning is the first step to effective instrument reprocessing; if debris is not removed, the instrument surface cannot be effectively sterilized. The Hu-Friedy Ultrasonic Cleaning Monitors are used for monitoring the efficiency of the cleaning process in ultrasonic cleaners. The monitor strips contain a test soil that mimics the presence of blood and tissue that may be found on an instrument after use. During the test the monitor strip is assessing multiple variables of the cleaning process including cavitation, time, temperature, and detergent. Full removal the test soil from the strip indicates an effective cleaning process. The test strips should be used in conjunction with the holder (IMS-1200H) on a daily or per load basis.

How it works:
  • Insert single use Cleaning Monitor strip into the holder
  • Place holder with strip face up in equipment:
    • - For ultrasonic cleaners: on top of instruments fully covered in solution - For washer-disinfectors: in a basket on a shelf of the washer
  • Run cleaning cycle
  • Review results of Cleaning Monitor to determine if adjustments to process are needed

Features

  • The test soil on the test strips is a non-toxic, synthetic soil that mimics the blood and tissue typically found on instruments after use.
  • No actual blood components are contained in the test soil.
  • Test/strip holder keeps the cleaning monitor in place in order to provide an accurate res
    • ult. For the washer-disinfector cleaning monitor, the holder mimics a hinged instrument to measure the water impingement and removal of soil.
  • Monitor strips are easy to use and easy to interpret.
  • Cost effective in order to promote routine use and monitoring of the cleaning process.

Literature

Ultrasonic Cleaning Monitor IFU DOWNLOAD
Ultrasonic Cleaning Monitor Troubleshooting Chart DOWNLOAD
Ultrasonic Cleaning Monitor Record DOWNLOAD
Cleaning Monitors Sell Sheet DOWNLOAD
Dental Advisor Research Report: Correlation of Hu-Frieddy Cleaning Monitors with Instrument Cleaning DOWNLOAD
HuFriedyGroup Product Catalogs VIEW
Instrument Reprocessing Guide DOWNLOAD

Testimonials

Cleaning dental instruments is the first and very critical step in processing them for reuse. If debris is not removed from instruments, the sterilization process will not be effective since the steam or chemical vapor in a heat sterilizer must contact the instrument surface.
Mary Govoni